monitors:cpu-load-calc

Error loading plugin struct
ParseError: syntax error, unexpected 'fn' (T_STRING), expecting :: (T_PAAMAYIM_NEKUDOTAYIM)
More info is available in the error log.

Xymon Client CPU Load Calculator

Author Bill Howe
Compatibility Xymon 4.3
Requirements 'bc' package
Download None
Last Update 2016-11-25

Calculate (and set) a Xymon client's cpu load thresholds, based off of the client's reported number of processors from the hostdata files.

This is meant to run on the Xymon Server periodically with cron.

It allows for far more useful load monitoring than arbitrarily setting a generic load or spending a lot of time editing config files for each system.

Installation instructions.

Client side

No modifications required.

Server side

  1. Install the 'bc' package (allows bash string to floating point number conversion)
    1. Enterprise Linux 6/7
      yum install bc
  2. Create the cpu-load-calc.sh script somewhere such as: /root/scripts/cpu-load-calc.sh
    1. See source below for contents
    2. Edit the “Customize Here” section
      1. Edit multipliers if desired(number of procs * number for warning and critical CPU load thresholds)
  3. Create the auto load directory on the Xymon server
    1. Default: /etc/xymon/analysis.d/auto-cpuload.d
  4. Add the auto load directory to the Xymon main analysis.cfg file so it is included
    1. Default: “directory /etc/xymon/analysis.d/auto-cpuload.d” to /etc/xymon/analysis.cfg
  5. Set the default load in /etc/xymon/analysis.cfg to a super low warning level of “0.1” and a critical of something very high, such as “100.0”.
    1. That way, a hostdata file is generated for a system that has not had its load auto calculated. (and you don't get alert emails/texts as its only at warning)
  6. Setup the script to auto run via cron (-v is verbose output)
    1. Example
      /etc/cron.hourly/xymon-calc-cpuload.sh
      #!/bin/bash
      # Description: Execute xymon script to auto calculate cpu load from hostdata
       
      /root/scripts/cpu-load-calc.sh -v &> /root/scripts/cpu-load-calc.log

Expand source code below. Create /root/scripts/cpu-load-calc.sh:

Show Code ⇲

Hide Code ⇱

#!/bin/bash
# Title: cpu-load-calc.sh
# Description: Calculate a xymon client's cpu load (Run on Xymon Server periodically with cron)
# Dependency: Requires 'bc' package
# Last Change: 2018-05-22
# Recent Changes:-Updated awk search to look for [nproc] at the beginning of the line

#=======================
# Customize Here
#=======================

# Warning and Critical Load Multipliers (num of procs * multiplier)
load_warn_multiplier=1.0
load_crit_multiplier=1.5

# Directory to save auto load thresholds
auto_load_dir="/etc/xymon/analysis.d/auto-cpuload.d"

# Xymon server's hostdata directory
xymon_hostdata_dir="/var/lib/xymon/hostdata"

# Xymon server's main analysis config file
xymon_analysis_cfg="/etc/xymon/analysis.cfg"
#=======================
# End of Customize
#=======================

#=======================
# Pre-Run Error Checking
#=======================
## Dependency Check ##
which bc &> /dev/null
if [[ $? -eq 1 ]]; then
  echo ">> Error! Dependent package 'bc' (byte code) not detected. Exiting..."
  exit 1
fi

## Does the Auto Load Directory exist?
if [[ ! -d ${auto_load_dir} ]]; then
  echo ">> Error! The directory (${auto_load_dir}) does not exist or is not a directory. Exiting..."
  exit
fi

## Write Access Check
touch ${auto_load_dir}/testfile &> /dev/null
if [[ $? -eq 1 ]]; then
  echo ">> Error! User '$(whoami)' does not have write access to ${auto_load_dir}! Exiting..."
  exit 1
else
  rm -f ${auto_load_dir}/testfile &> /dev/null
fi

## Check if the auto_load_dir is included in main analysis config file
grep "^directory ${auto_load_dir}" ${xymon_analysis_cfg} &> /dev/null
if [[ $? -eq 1 ]]; then
  echo -e ">> Warning! Auto load directory (${auto_load_dir}) is not included in ${xymon_analysis_cfg}. Continuing, but auto CPU load settings will not take affect until 'directory ${auto_load_dir}' is added to ${xymon_analysis_cfg}.\n"
fi
#=======================
# End of Pre-Run Error Checking
#=======================

#===============================
# Functions; Main starts after
#===============================

function show_usage
{
  echo -e "\n####==== Xymon Client Auto Load Thresholds ====####"
  echo -e "\nDescripton: Calculate a xymon client's cpu load."
  echo -e "\n--Usage"
  echo -e "$0      => No arguments, configure with no verbosity."
  echo -e "$0 -v   => Verbose output."
  echo -e "$0 -r   => Refresh CPU load data (force hostdata update)."
  echo -e "$0 -h   => Display usage."
}

# Force snapshots of hostdata
function force_hostdata
{
  # Use node name passed as argument
  node_name=${1}

  # Lie to Xymon that the node's cpu is green, then yellow, forcing a hostdata snapshot
  xymon 127.0.0.1 "status ${node_name}.cpu green $(date)"
  xymon 127.0.0.1 "status ${node_name}.cpu yellow $(date)"
}

#=======================
# Get Script Arguments
#=======================
# Reset POSIX variable in case it has been used previously in this shell
OPTIND=1

# By default, no verbose output
verbose_output="no"
refresh_cpus="no"

while getopts "hrv" opt; do
  case "${opt}" in
    h) # -h (help) argument
      show_usage
      exit 0
    ;;
    r) # -r (refersh cpus) argument
      refresh_cpus="yes"
    ;;
    v) # -v (verbose) argument
      verbose_output="yes"
    ;;
    *) # invalid argument
      show_usage
      exit 0
    ;;
  esac
done

#=======================
# Main Program
#=======================
echo -e "== Xymon Client Auto Load Thresholds =="
echo -e "Load Warning Multiplier: ${load_warn_multiplier}"
echo -e "Load Critical Multiplier: ${load_crit_multiplier}"
echo -e "Saving configs to: ${auto_load_dir}"

# For each node reporting host data
for node in $(ls ${xymon_hostdata_dir}); do

  if [[ ${verbose_output} == "yes" ]]; then
    echo -e "\n>> Working on node: ${node}"
  fi

  if [[ ${refresh_cpus} == "yes" ]]; then
    if [[ ${verbose_output} == "yes" ]]; then
      echo -e "\n-> Refreshing hostdata..."
    fi
    # Force an update of hostdata
    force_hostdata ${node}
  fi

  # Get the number of procs reported from node's most recent host data file
  node_num_procs="$(cat ${xymon_hostdata_dir}/${node}/$(ls -tr ${xymon_hostdata_dir}/${node}/ | tail -1) | awk '/^\[nproc]/ { getline; print }')"
  
  # If node_num_procs is empty or not a number, move to the next node
  if [[ -z ${node_num_procs} || ! ${node_num_procs} =~ [0-9][0-9]* ]]; then
    # Did not find 'nproc' in the host data file or no number from nproc returned

    if [[ ${verbose_output} == "yes" ]]; then
      echo "-> Warning! Could not find 'nproc' in ${node}'s host data file or no number returned. Skipping..."
    fi

    continue
  fi

  # Calculate the warning and critical load thresholds (normalize as a floating point with bc)
  load_warning=$(echo "${node_num_procs} * ${load_warn_multiplier}" | bc)
  load_critical=$(echo "${node_num_procs} * ${load_crit_multiplier}" | bc)

  if [[ ${verbose_output} == "yes" ]]; then
    echo -e "-> Number of Procs: ${node_num_procs}"
    echo -e "-> Warning at: ${load_warning}"
    echo -e "-> Critical at: ${load_critical}"
    echo -e "-> Creating node analysis drop in file..."
  fi

  # Create analysis drop in file
  echo "# ${node}'s CPU Load Thresholds (Warning Critical)" > ${auto_load_dir}/${node}.cfg
  echo "HOST=${node}" >> ${auto_load_dir}/${node}.cfg
  echo "  LOAD  ${load_warning}  ${load_critical}" >> ${auto_load_dir}/${node}.cfg
done

echo -e "\n== Auto Load Thresholds Complete =="

exit 0
  • Enterprise Linux 5 does not report number of procs in hostdata. Those systems will need to be set manually in analysis.cfg files.
  • 2018-05-22
    • Updated awk search to look for [nproc] at the beginning of the line.
  • 2016-12-28
    • Added green status in force_hostdata function to improve refresh logic.
  • 2016-11-25
    • Initial release - Moved all information from Xymon mailing lists to here.
  • monitors/cpu-load-calc.txt
  • Last modified: 2018/05/22 15:05
  • by dozor