My Monitor (CHANGEME)

#!/bin/bash
#
# Author: Peter Kok(pk21@hotmail.com)
# Description: this check will test the status of the ip sla command on cisco equipment to locate connectivity issues in a network. It was created especially to test the icmp-echo option but other tests will probably also work.
#
# An example of a icmp-echo test below. You can configure a tag so xymon can use is to describe what is being tested:
# ip sla 3
#  icmp-echo 172.16.1.2
#   threshold 200
#   tag iBGP
# ip sla schedule 3 life forever start-time now
#
# the check will display "Index: 3      RTT: 1  Threshold: 200  Status: ok      Tag: iBGP" in xymon
#


BBHTAG=sla     # What we put in bb-hosts to trigger this test
COLUMN=$BBHTAG  # Name of the column, often same as tag in bb-hosts

COMMUNITY=public


$BBHOME/bin/bbhostgrep $BBHTAG | while read L
do
  set $L        # To get one line of output from bbhostgrep

  HOSTIP="$1"
  MACHINEDOTS="$2"
  MACHINE=`echo $2 | $SED -e's/\./,/g'`

  COLOR=green
  MSG="$BBHTAG status for host $MACHINEDOTS"

  declare -a STATUSCODES=('other' 'ok' 'disconnected' 'overThreshold' 'timeout' 'busy' 'notConnected' 'dropped' 'sequenceError' 'verifyError' 'applicationSpecific' 'dnsServerTimeout' 'tcpConnectTimeout' 'httpTransactionTimeout' 'dnsQueryError' 'httpError' 'error')

for INDEX in `/usr/bin/snmpwalk -c $COMMUNITY -v2c $HOSTIP 1.3.6.1.4.1.9.9.42.1.2.1.1.4|awk '{ print $1 }'|awk -F\. '{ print $10 }'`
do

        RTT=$(/usr/bin/snmpget -c $COMMUNITY -v2c $HOSTIP 1.3.6.1.4.1.9.9.42.1.2.10.1.1.$INDEX|awk '{ print $4 }')
        TAG=$(/usr/bin/snmpget -c $COMMUNITY -v2c $HOSTIP 1.3.6.1.4.1.9.9.42.1.2.1.1.3.$INDEX|awk -F\" '{ print $2 }')
        STATUS=$(/usr/bin/snmpget -c $COMMUNITY -v2c $HOSTIP 1.3.6.1.4.1.9.9.42.1.2.10.1.2.$INDEX|awk '{ print $4 }')
        THRESHOLD=$(/usr/bin/snmpget -c $COMMUNITY -v2c $HOSTIP 1.3.6.1.4.1.9.9.42.1.2.1.1.5.$INDEX|awk '{ print $4 }')

        CCOLOR="green"
        if [ "$STATUS" == 0 ] && [ "$COLOR" != "red" ]
        then
                CCOLOR="yellow"
                if [ "$COLOR" != "red" ]
                then
                        COLOR=yellow
                fi
        elif [ "$STATUS" == 1 ]
        then
                CCOLOR="green"
                if [ "$COLOR" != "red" ] && [ "$COLOR" != "yellow" ]
                then
                        COLOR=green
                fi
        else
                COLOR=red
                CCOLOR="red"
        fi

        STATUSTRANSLATED=${STATUSCODES[$STATUS]}
        MSG=$(echo -e "$MSG\n<img src=/xymon/gifs/$CCOLOR.gif> Index: $INDEX\tRTT: $RTT\tThreshold: $THRESHOLD\tStatus: $STATUSTRANSLATED\tTag: $TAG")

done

  $BB $BBDISP "status $MACHINE.$COLUMN $COLOR `date`

  ${MSG}
  "
done



exit 0