Differences

This shows you the differences between two versions of the page.

--- monitors:zonemem [2013/08/02 05:40] – [Installation] vernon
+++ monitors:zonemem [2013/08/02 05:49] – [Installation] vernon
@@ Line 32: / Line 32: @@
 \\
-And add the following to graphs.cfg
+Then add the following to graphs.cfg
   [zmem]
@@ Line 52: / Line 52: @@
 <hidden onHidden="Show Code ⇲" onVisible="Hide Code ⇱">
 <code>
+#!/usr/bin/ksh
+if [ "$(/usr/bin/zonename)" != "global" ]
+then
+   echo "I only run in global zones."
+   exit 1
+fi
+SWAPRED=90
+SWAPYEL=75
+MEMRED=95
+MEMYEL=80
+TEMPFILE=$XYMONTMP/zonemem.tmp
+COLOUR=green
+ALERT_HIGH_SWAP=true
+ALERT_HIGH_MEM=true
+typeset -L10 ZONE
+typeset -R5 MEMCAP SWAPCAP CAP
+typeset -R6 PCT_USED PCTSWAP
+typeset -R8 MEMUSED MEMFREE TOTMEMFREE GLOBUSED RSS PCT_USEDG SWAP
+# If we count the ZFS cache as free mem, then set this to true.
+# If false, we will use the vmstat definition of free memory.
+ZFSFREE=true
+ALERT=1  # 1= alert on high usage
+YELLOW=80
+RED=90
+INCLUDE_GLOBAL=true
+# Now we redefine some variables, if they are set in clientlocal
+LOGFETCH=${XYMONTMP}/logfetch.$(uname -n).cfg
+if [ -f $LOGFETCH ]
+then
+   grep "^ZONEMEM:" $LOGFETCH | cut -d":" -f2 \
+      | while read NEW_DEF
+        do
+           $NEW_DEF
+        done
+fi
+size_to_K ()
+{
+    typeset -R1 UNIT
+    SIZE=$1
+    UNIT=$SIZE
+    case $UNIT in
+       K)
+          MULTIPLYER=1;;
+       M)
+          MULTIPLYER=1024;;
+       G)
+          MULTIPLYER=1048576;;
+       T)
+          MULTIPLYER=1073741824;;
+    esac
+    SIZE=${SIZE%?}
+    ((SIZE=SIZE*MULTIPLYER))
+    echo $SIZE
+}
+size_K_to_G ()
+{
+   # Or to M is we add an M parameter.
+   if [ "$2" = "M" ]
+   then
+      GSize=$(echo "$1/1024" | bc)M
+   else
+      GSize=$(echo "scale=3; $1/1048576+0.005" | bc)
+      GSize=${GSize%?}G
+   fi
+   echo $GSize$UNIT
+}
+INSTALLED_MEM=$(prtdiag -v | grep Memory)
+GLOBMEM=$(echo $INSTALLED_MEM | awk '{ print $3"M" }')
+GLOBMEM=$(size_to_K $GLOBMEM)
+date > $TEMPFILE
+echo >> $TEMPFILE
+echo "Global $INSTALLED_MEM" | sed "s/size:/size - /g" >> $TEMPFILE
+NUMZONES=$(zoneadm list | wc -l)
+NUMZONES=$(echo $NUMZONES | sed 's/^[ \t]*//')
+if [ "$ZFSFREE" = "true" ]
+then
+    MEMFREE_GLOB=$( $XYMONCLIENTHOME/ext/getmemstat.ksh | egrep "^ZFS File Data|^Free" | cut -c18-  | awk '{ sum += $2 } END { print sum }')
+    MEMFREE_GLOBK=$(size_to_K ${MEMFREE_GLOB}M)
+else
+    MEMFREE_GLOBK=$(vmstat 2 2 | tail -1 | awk '{ print $5 }')
+fi
+echo "                     M E M O R Y                           |          S W A P " >> $TEMPFILE
+echo "Zone      MemCap   MemUsed% AvailMem  UsedMem  %of Global  | SwapCap  SwapUsed%  SwapUsed " >> $TEMPFILE
+prstat -n 1,10 -Z 1 2 | grep -v "^Total" | tail -${NUMZONES} | grep -v "global" | \
+while read ID PROC SWAP RSS MEM TIME CPU ZONE
+do
+   ALERT_TAG=""
+   MEMCAP=$(zonecfg -z $ZONE info capped-memory | grep physical | cut -d: -f2)
+   SWAPCAP=$(zonecfg -z $ZONE info capped-memory | grep swap | cut -d: -f2 | sed 's/]//g')
+   MEMUSED=$(size_to_K $RSS)
+      #Add the .005 to simulate rounding when we are going to be trunking.
+   PCT_USEDG=$(echo "scale =3; ((${MEMUSED}*100/${GLOBMEM})+0.005)" | bc)
+   PCT_USEDG=${PCT_USEDG%?}
+   if [ -z $MEMCAP ]
+   then
+      MEMFREE=$MEMFREE_GLOBK
+      PCT_USED=$PCT_USEDG
+      CAP="n/a"
+      MEMFREEL=$MEMFREE_GLOBK
+      PCT_USED=$PCT_USEDG
+      # No cap, we look at the total free.
+   else
+      # With a cap we need to compare total used to the cap
+      MEML=$(size_to_K $MEMCAP)
+      MEMFREEL=$(echo ${MEML}-${MEMUSED} | bc)
+      MEMFREE=$MEMFREEL
+      PCT_USED=$(echo "scale=3; (${MEMUSED}*100/${MEML})+0.005" | bc)
+      #Add the .005 to simulate rounding when we are going to be trunking.
+      PCT_USED=${PCT_USED%?}
+      CAP="$MEMCAP"
+   fi
+   TOTMEMFREE=$(size_K_to_G $MEMFREE M)
+   GSWAP=$(swap -s | awk '{ print $2 }' | sed "s/k$//g")
+   if [ -z $SWAPCAP ]
+   then
+      SWAPCAP="n/a"
+      TOTSWAPK=$GSWAP
+      # No cap, we look at the total free.
+   else
+      TOTSWAPK=$(size_to_K $SWAPCAP)
+      # With a cap we need to compare total used to the cap
+   fi
+   SWAPK=$(size_to_K $SWAP)
+   PCTSWAP=$(echo "scale=3; (${SWAPK}*100/${TOTSWAPK})+0.005" | bc)
+   PCTSWAP=${PCTSWAP%?}
+   if [ "$ALERT_HIGH_SWAP" = "true" ]
+   then
+      [ $PCTSWAP -gt $SWAPYEL ] && ALERT_TAG="yellow"
+      [ $PCTSWAP -gt $SWAPRED ] && ALERT_TAG="red"
+   fi
+   if [ "$ALERT_HIGH_MEM" = "true" ]
+   then
+      [ $PCT_USED -gt $MEMYEL -a "$ALERT_TAG" != "red" ] && ALERT_TAG="yellow"
+      [ $PCT_USED -gt $MEMRED ] && ALERT_TAG="red"
+   fi
+   [ ! -z  "$ALERT_TAG" -a "$COLOUR" != "red" ] && COLOUR=$ALERT_TAG
+   [ ! -z "$ALERT_TAG" ] && ALERT_TAG="&$ALERT_TAG"
+   echo "$ZONE $CAP    ${PCT_USED}% ${TOTMEMFREE} $RSS   ${PCT_USEDG}%  |  $SWAPCAP     ${PCTSWAP}%  $SWAP $ALERT_TAG" >> $TEMPFILE.mem
+done
+sort $TEMPFILE.mem >> $TEMPFILE
+$XYMON $XYMSRV "status $MACHINE.zmem $COLOUR $(cat $TEMPFILE)"
+$XYMON $XYMSRV "data $MACHINE.zmem $(echo; cat $TEMPFILE.mem | grep -v "Global " | awk '{ print $1":"$3 }' | sed 's/\%$//g'; echo; echo "Ignore this")"
+rm $TEMPFILE
+rm $TEMPFILE.mem
 </code>
 </hidden>
 ===== Known  Bugs and Issues =====
+This is pretty "rough and ready".\\
+It hasn't been code reviewed, or even looked at by anybody else.\\
+I can safely say, there are no **known** bugs. LOL \\
+But, we all know the rules. Any useful program will contain at least one variable, one loop and one bug.\\
+I know where to find the variables and the loops. \\
+I leave finding the bug as an exercise for the reader.\\
+If you find it, please let me know.
 ===== To Do =====
+Find that last unknown bug.
 ===== Credits =====
+All my own work.\\
+Nobody else to blame.
 ===== Changelog =====
-  * **YYYY-MM-DD**
+  * **2013-08-02**
     * Initial release