monitors:dellsystemcheck

no way to compare when less than two revisions

Differences

This shows you the differences between two versions of the page.


—monitors:dellsystemcheck [2009/11/23 05:45] (current) – created - external edit 127.0.0.1
Line 1: Line 1:
 +====== Dell System Check ======
 +
 +^ Author | [[ craig.boyce@rodney.govt.nz | Craig Boyce ]] |
 +^ Compatibility | Xymon 4.2 |
 +^ Requirements | Windows, BBWin, Dell Open Manage |
 +^ Download | None |
 +^ Last Update | 2007-08-06 |
 +
 +===== Description =====
 +The script reports the status of the hardware on Dell Servers running Windows and Dell OpenManage 5.0 or greater and alerts upon any failure reported.
 +The information is gathered using the commandline interface omreport.
 +The script has successfully reported on power supply and disk failures but I have not had any other hardware failures.
 +
 +===== Installation =====
 +=== Client side ===
 +  - Copy the script to the bbwin\ext directory or any sub directory you would prefer.
 +  - Update the bbwin\etc\bbwin.cfg externals section to include the script as per below making sure the path is correct.<file>
 +<externals>
 + <setting name="timer" value="3m" />
 + <setting name="logstimer" value="60s" />
 + <load value="cscript //B ..\ext\SystemCheck.vbs" timer="5m" /> 
 +</externals>
 +</file>
 +
 +The script allows the changing of the test column name and uptime duration before alerting by changing the following lines in the script.
 +
 +| strTestName = "syscheck" | Change this to what you want the test column to be. |
 +| strUpTime = "30" | Change this to the length of time required before alerting a reboot is required. |
 +
 +=== Server side ===
 +  * None
 +
 +===== Source =====
 +
 +==== SystemCheck.vbs ====
 +<hidden onHidden="Show Code ⇲" onVisible="Hide Code ⇱">
 +<code vb>
 +'==========================================================================
 +' NAME: Server System check.vbs
 +' COMMENT: Report Information from Dell OpenManage
 +' AUTHOR: Craig Boyce, Rodney District Council
 +' EMAIL: craig.boyce@rodney.govt.nz
 +' HISTORY
 +' VERSION : 1.00 13/08/2006 Initial Development
 +' VERSION : 2.00 20/7/2007 Production Release
 +' VERSION : 2.10 1/8/2007 Updated by Sigurður Guðbrandsson (sigurdur@raforninn.is) to report detailed information for Physical Disk, Memory, NIC and Temp
 +' Now Requires OpenManage 5.2 to display the Physical disk information
 +' VERSION : 2.20 3/8/2007 Resolved issue with a non green status changing all the following statuses to the non green status
 +' VERSION : 2.30 7/8/2007 Added the ability to turn off individual status checks if not wanted.
 + 
 +' Requires Dell OpenManage 5.0 or greater to be installed on the Dell Servers
 +'==========================================================================
 + 
 +On Error Resume Next
 + 
 +Dim objShell,WSHNetwork
 +Dim typelib,cslid,ServerName,lastcntrlnum,cntrlnum,lastindexnum,indexnum,boolValid
 +Dim logmessage,logfile
 +Dim strLayout,strSize,strLine,intStart,strFail,strCmd
 +Dim shChassis,shStorageVirtual,shStoragePhysical,shMemory,shNetwork,shTemp
 + 
 +' Set Variables and get the Server Name
 + 
 +Set objShell = WScript.CreateObject("WScript.Shell")
 +Set WSHNetwork = WScript.CreateObject("WScript.Network")
 + 
 +ServerName = objShell.ExpandEnvironmentStrings("%COMPUTERNAME%")
 + 
 +' User definable section
 + 
 +strTestName = "syscheck" ' Change this to what you want the test column to be.
 +shChassis = 1 ' Change this to 0 to disable the Chassis status check
 +shStorageVirtual = 1 ' Change this to 0 to disable the Storage Virtual status check
 +shStoragePhysical = 1 ' Change this to 0 to disable the Storage Physical status check
 +shMemory = 1 ' Change this to 0 to disable the Memory status check
 +shNetwork = 1 ' Change this to 0 to disable the Network status check
 +shTemp = 1 ' Change this to 0 to disable the Temperature status check
 + 
 +strAlarmState = "green"
 +strOutput   = ""
 +cntrlnum = 0
 +indexnum = 0
 +Set oShell = WScript.CreateObject("WScript.Shell")
 +' Check to see If used with BBWin or Big Brother client and set extPath.
 +extPath = oShell.RegRead("HKLM\SOFTWARE\BBWin\tmpPath")
 +If extPath = "" Then
 + extPath = oShell.RegRead("HKLM\SOFTWARE\Quest Software\BigBrother\bbnt\ExternalPath\")
 +End If
 + 
 +' ========================================
 +' Main Code Starts Here
 + 
 +Set WinMgt = GetObject("winmgmts:")
 +Set CompSys = WinMgt.ExecQuery("Select * from Win32_ComputerSystem")
 +For Each Item In CompSys
 +strmake = rtrim(item.manufacturer)
 +strmodel = rtrim(item.model)
 +strram = Clng(Item.TotalPhysicalMemory /1048576) + 1
 +Next
 + 
 +Set CompSys = WinMgt.ExecQuery("Select * from Win32_Processor",,48)
 +For Each Item In CompSys
 +strproc = Item.Name
 +Next
 + 
 +Set CompSys = WinMgt.ExecQuery("Select * from Win32_BIOS")
 +For Each Item In CompSys
 +strSerial = rtrim(item.SerialNumber)
 +Next
 + 
 +strOutput = strOutput & "System Information for Server " & ServerName & vbcrlf & vbcrlf
 +strOutput = strOutput & strmake & vbtab & strmodel & vbtab & "Service Tag #" & vbtab & strSerial & vbcrlf & vbcrlf
 +strOutput = strOutput & "Processor:" & vbtab & strproc & vbcrlf
 +strOutput = strOutput & "Memory:" & vbtab & vbtab & strram & " Mb" & vbcrlf & vbcrlf
 + 
 + 
 + 
 +If Left(strmake, 4) = "Dell" Then
 + omapath = oShell.RegRead("HKLM\SOFTWARE\Dell Computer Corporation\OpenManage\Applications\SystemsManagement\InstallPath")
 + omaver = oShell.RegRead("HKLM\SOFTWARE\Dell Computer Corporation\OpenManage\Applications\SystemsManagement\Version")
 + omreportpath = omapath & "oma\bin\omreport"
 +
 + strOutput = strOutput & "<a href=https://" & ServerName & ":1311 target=_new>Dell OpenManage Web Page</a>" & vbcrlf & vbcrlf
 +
 + If shChassis = 1 Then
 + strOutput = strOutput & "Chassis Status Information" & vbcrlf & vbcrlf
 + 
 + strcommand = Chr(34) &omreportpath & Chr(34) & " chassis" 
 + Set objWshScriptExec = objShell.Exec(strcommand)
 + Set objStdOut = objWshScriptExec.StdOut
 + 
 + While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +    If InStr(strLine,"Ok") Then
 +    strOutput = strOutput & "&green" & vbtab & strLine & vbcrlf
 +    End If
 +    If InStr(strLine,"Non-Critical") Then
 +    strAlarmState = "yellow"
 +        strOutput = strOutput & "&yellow" & vbtab & strLine & vbcrlf
 +    End If
 +    If InStr(strLine,"Critical") Then
 +    strAlarmState = "red"
 +        strOutput = strOutput & "&red" & vbtab & strLine & vbcrlf
 +    End If
 + Wend
 + End If
 +
 + If shStorageVirtual = 1 Then
 + strOutput = strOutput & vbcrlf & "Storage Status Information for virtual disks" & vbcrlf & vbcrlf
 +
 + ' Determine the number of storage controllers in the server and loop through them displaying the virtual disk status
 + 
 + lastcntrlnum = DELLStorageCntrlNum()
 + While CInt(cntrlnum) <= CInt(lastcntrlnum)
 + strcommand = Chr(34) &omreportpath & Chr(34) & " storage vdisk controller=" & cntrlnum 
 + Set objWshScriptExec = objShell.Exec(strcommand)
 + Set objStdOut = objWshScriptExec.StdOut
 + DELLStorageStatus cntrlnum
 + cntrlnum = cntrlnum + 1
 + Wend
 + End If
 +
 + If shStoragePhysical = 1 Then
 + strOutput = strOutput & vbcrlf & "Storage Status Information for physical disks" & vbcrlf & vbcrlf
 +
 + ' Determine the number of storage controllers in the server and loop through them displaying the physical disk status
 +  ' Time for a reset also on the ctrlnum used earlier.
 + cntrlnum = 0
 + lastcntrlnum = DELLStorageCntrlNum()
 + While CInt(cntrlnum) <= CInt(lastcntrlnum)
 + strcommand = Chr(34) &omreportpath & Chr(34) & " storage pdisk controller=" & cntrlnum 
 + Set objWshScriptExec = objShell.Exec(strcommand)
 + Set objStdOut = objWshScriptExec.StdOut
 + DELLStorageStatus cntrlnum
 + cntrlnum = cntrlnum + 1
 + Wend
 + End If
 +
 + If shMemory = 1 Then 
 + strOutput = strOutput & vbcrlf & "Memory Status Information for memory modules" & vbcrlf & vbcrlf
 +
 + ' Determine the number of memory indexes in the server and loop through them displaying the memory index status
 + strCmd = " chassis memory"
 + lastindexnum = DELLIndexNum
 + while CInt(indexnum) <= CInt(lastindexnum)
 + strcommand = Chr(34) &omreportpath & Chr(34) & " chassis memory index=" & indexnum 
 + Set objWshScriptExec = objShell.Exec(strcommand)
 + Set objStdOut = objWshScriptExec.StdOut
 + DELLMemoryStatus indexnum
 + indexnum = indexnum + 1
 + Wend
 + End If
 +
 + indexnum = 0 ' Reset the indexnum variable
 +
 + If shNetwork = 1 Then
 + strOutput = strOutput & vbcrlf & "Network Interface Status Information for NICS" & vbcrlf & vbcrlf
 +
 + ' Determine the number of nic indexes in the server and loop through them displaying the nic index status
 + strCmd = " chassis nics" ' We need to know what index we want
 + lastindexnum = DELLIndexNum
 + while CInt(indexnum) <= CInt(lastindexnum)
 + strcommand = Chr(34) &omreportpath & Chr(34) & " chassis nics index=" & indexnum 
 + Set objWshScriptExec = objShell.Exec(strcommand)
 + Set objStdOut = objWshScriptExec.StdOut
 + DELLNetworkStatus indexnum
 + indexnum = indexnum + 1
 + Wend
 + End If
 +
 + indexnum = 0 ' Reset the indexnum variable
 +
 + If shTemp = 1 Then
 + strOutput = strOutput & vbcrlf & "Temperature Status Information for Chassis" & vbcrlf & vbcrlf
 +
 + ' Determine the number of nic indexes in the server and loop through them displaying the nic index status
 + strCmd = " chassis temps"
 + lastindexnum = DELLIndexNum
 + while CInt(indexnum) <= CInt(lastindexnum)
 + strcommand = Chr(34) &omreportpath & Chr(34) & " chassis temps index=" & indexnum 
 + Set objWshScriptExec = objShell.Exec(strcommand)
 + Set objStdOut = objWshScriptExec.StdOut
 + DELLTemperatureStatus indexnum
 + indexnum = indexnum + 1
 + Wend
 + End If
 +
 +
 +End If
 + 
 + 
 +If strmake = "HP" Then 
 +' For future development, If only HP had a command line interface for getting the server status
 +End If
 + 
 + 
 +' Write the file for BB
 +WriteFile extPath, strTestName, strAlarmState, strOutput
 + 
 +'===========================================================
 +' FUNCTIONS and SUBS start here
 + 
 +' This SUB is used for outputting the file to the external's directory in bb
 +SUB WriteFile(strExtPath, strTestName, strAlarmState, strOutput)
 +    Set fso = CreateObject("Scripting.FileSystemObject")
 +    strOutput = strAlarmState & " " & Date & " " & Time & vbcrlf & vbcrlf & strOutput & vbcrlf
 +    Set f = fso.OpenTextFile(strExtPath & "\" & strTestName , 8 , TRUE)
 +    f.Write strOutput
 +    f.Close
 +    Set fso = Nothing
 +END Sub
 + 
 +' This Function is used for determining the number of storage controllers in the server
 +' NEW: vdisk controllers should be the same amount as pdisk controllers (virtual == physical)
 +Function DELLStorageCntrlNum
 + strcommand = Chr(34) &omreportpath & Chr(34) & " storage vdisk controller=10" ' Check for 10 Controllers, The output lists the valid controllers in the server
 + Set objWshScriptExec = objShell.Exec(strcommand)
 + Set objStdOut = objWshScriptExec.StdOut
 + While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +    If InStr(strLine,"Invalid controller value. Read, controller=10") Then
 +    While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +    If InStr(strLine,"Valid values") Then
 +    DELLStorageCntrlNum = Right(strLine, 1) ' Get the highest numbered controller
 +    End If     
 +    Wend
 +    End If
 +  Wend
 +End Function
 +
 +' This function is used for determining the number of indexes, this is almost identical to the storage function above
 +' TODO: I assume that there is only one memory array .. however I do not have a server with more arrays so this is defaulted to Array 1.
 +Function DELLIndexNum
 + strcommand = Chr(34) &omreportpath & Chr(34) & strCmd & " index=50" ' Check for 50 Indexes, The output lists the valid indexes in the server
 + Set objWshScriptExec = objShell.Exec(strcommand)
 + Set objStdOut = objWshScriptExec.StdOut
 + While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +    If InStr(strLine,"Error! Index too large.") Then
 + DELLIndexNum = Right(strLine, 1) ' Get the highest numbered index
 +    End If
 +  Wend
 +End Function
 +
 +' This SUB is used for determining the status and information of the Dell Storage components
 +Sub DELLStorageStatus(strcntrl)
 + While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +    If InStr(strLine,"No Array/Hard Disks found") Then ' Check to see if there is a virtual disk on the controller
 +    Exit Sub
 +    End If
 +    While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +    If InStr(strLine,"Status") Then ' Check the status line of the output and get the status
 +    intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    newLine = Mid(strLine, intStart, 250)
 +    If newLine = "Ok" Then
 +    strOutput = strOutput & "&green" & vbtab & newLine
 +    End If
 +    If newLine = "Non-Critical" Then
 +    strAlarmState = "yellow"
 +    strOutput = strOutput & "&yellow" & vbtab & newLine
 +    End If
 +    If newLine = "Critical" Then
 +    strAlarmState = "red"
 +    strOutput = strOutput & "&red" & vbtab & newLine
 +    End If
 +        End If
 + ' ADDED: difference between physical and virtual includes added if statements.
 + ' ADDED: predicted failure notice.
 +        If Left(strLine, 4) = "Name" Then
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strName = Mid(strLine, intStart, 250)
 +    strOutput = strOutput & vbtab & ": " & strName & " on Storage Controller " & strcntrl & vbcrlf
 +    End If
 +    If Left(strLine, 6) = "Layout" Then
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strLayout = Mid(strLine, intStart, 250)
 +    End If
 +    If Left(strLine, 4) = "Size" Then
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strSize = Mid(strLine, intStart, 250)
 +    strOutput = strOutput & vbtab & vbtab & "  : " & strLayout & vbtab & strSize & vbcrlf & vbcrlf
 +    End If
 + If Left(strLine, 7) = "Failure" Then
 + intStart = InStr(strLine, ":")
 + intstart = intStart + 2
 + strFail = Mid(strLine, intStart, 250)
 +    End If
 +    If Left(strLine, 4) = "Type" Then
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strLayout = Mid(strLine, intStart, 250)
 +    End If
 +    If Left(strLine, 8) = "Capacity" Then
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strSize = Mid(strLine, intStart, 250)
 +    strOutput = strOutput & vbtab & vbtab & "  : " & strLayout & vbtab & strSize & vbcrlf
 + strOutput = strOutput & vbtab & vbtab & "  : Failure Predicted = " & strFail & vbcrlf & vbcrlf
 + End If
 +      Wend
 + Wend
 +End Sub
 + 
 +' This SUB is used for determining the status and information of the Dell Memory components
 +' The reason I read the next line after finding the line I want is that when I run omreport chassis memory index=NUM I get an attribute line and a value line.
 +Sub DELLMemoryStatus(strmemindex)
 + While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +    If InStr(strLine,"Error! Index too large. Maximum memory index is:") Then ' Check to see if there is a memory module on this index.
 +    Exit Sub
 +    End If
 +    While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +    If InStr(strLine,"Status") Then ' Check the status line of the output and get the status
 + strLine = objStdOut.ReadLine
 +    intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    newLine = Mid(strLine, intStart, 250)
 +    If newLine = "Ok" Then
 +    strOutput = strOutput & "&green" & vbtab & newLine
 +    End If
 +    If newLine = "Non-Critical" Then
 +    strAlarmState = "yellow"
 +    strOutput = strOutput & "&yellow" & vbtab & newLine
 +    End If
 +    If newLine = "Critical" Then
 +    strAlarmState = "red"
 +    strOutput = strOutput & "&red" & vbtab & newLine
 +    End If
 +    End If
 + ' Let us display all the useful information now that we have the status.
 +        If Right(strLine, 4) = "Name" Then
 + strLine = objStdOut.ReadLine
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strName = Mid(strLine, intStart, 250)
 +    strOutput = strOutput & vbtab & ": " & strName & " on Memory Index " & strmemindex & vbcrlf
 +    End If
 +    If Right(strLine, 4) = "Size" Then
 + strLine = objStdOut.ReadLine
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strSize = Mid(strLine, intStart, 250)
 +    End If
 +    If Right(strLine, 4) = "Type" Then
 + strLine = objStdOut.ReadLine
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strLayout = Mid(strLine, intStart, 250)
 +    strOutput = strOutput & vbtab & vbtab & "  : " & strLayout & vbtab & strSize & vbcrlf
 +    End If
 + If Right(strLine, 8) = "Failures" Then
 + strLine = objStdOut.ReadLine
 + intStart = InStr(strLine, ":")
 + intstart = intStart + 2
 + strFail = Mid(strLine, intStart, 250)
 +    strOutput = strOutput & vbtab & vbtab & "  : Failures = " & strFail & vbcrlf & vbcrlf
 +    End If
 +      Wend
 + Wend
 +End Sub
 +
 +' This SUB is used for determining the status and information of the Dell Network Interfaces
 +Sub DELLNetworkStatus(strnicindex)
 + While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +    If InStr(strLine,"Error! Index too large.") Then ' Check to see if there is a memory module on this index.
 +    Exit Sub
 +    End If
 + boolValid = 0
 +    While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +' We cant get status information from NIC's
 +'  If InStr(strLine,"Status") Then ' Check the status line of the output and get the status
 +' strLine = objStdOut.ReadLine
 +'  intStart = InStr(strLine, ":")
 +'    intStart = intStart + 2
 +'    newLine = Mid(strLine, intStart, 250)
 +'    If newLine = "OK" Then
 +'    strOutput = strOutput & "&green" & vbtab & newLine
 +'    End If
 +'    If newLine = "Non-Critical" Then
 +'    strAlarmState = "yellow"
 +' strOutput = strOutput & "&yellow" & vbtab & newLine
 +'    End If
 +'    If newLine = "Critical" Then
 +'    strAlarmState = "red"
 +' strOutput = strOutput & "&red" & vbtab & newLine
 +'    End If
 +'       
 +'        End If
 + ' Let us display all the useful information we need
 +        If Left(strLine, 9) = "Interface" Then
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strName = Mid(strLine, intStart, 250)
 +    strOutput = strOutput & vbtab & ": " & strName & " on NIC Index " & strnicindex & vbcrlf
 +    End If
 +    If Left(strLine, 2) = "IP" Then
 +         intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strSize = Mid(strLine, intStart, 250)
 +    End If
 +    If Left(strLine, 10) = "Connection" Then
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strLayout = Mid(strLine, intStart, 250)
 + If Right(strLayout, 9) = "Connected" Then
 + boolValid = 1
 + End If
 +    strOutput = strOutput & vbtab & vbtab & "  : Connection Status: " & strLayout & vbcrlf
 + If boolvalid = 1 Then
 +     strOutput = strOutput & vbtab & vbtab & "  : IP Address: " & strSize & vbcrlf
 + End If
 +    End If
 +      Wend
 + Wend
 + strOutput = strOutput & vbcrlf
 +End Sub
 +
 +' This SUB is used for determining the status and information of the Dell Chassis Temperatures
 +Sub DELLTemperatureStatus(strtempindex)
 + While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +    If InStr(strLine,"Error! Index too large.") Then ' Check to see if there is a temperature sensor on this index.
 +    Exit Sub
 +    End If
 +    While Not objStdOut.AtEndOfStream
 +    strLine = objStdOut.ReadLine
 +    If InStr(strLine,"Status") Then ' Check the status line of the output and get the status
 +    intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    newLine = Mid(strLine, intStart, 250)
 +    If newLine = "Ok" Then
 +    strOutput = strOutput & "&green" & vbtab & newLine
 +    End If
 +    If newLine = "Non-Critical" Then
 +    strAlarmState = "yellow"
 +    strOutput = strOutput & "&yellow" & vbtab & newLine
 +    End If
 +    If newLine = "Critical" Then
 +    strAlarmState = "red"
 +    strOutput = strOutput & "&red" & vbtab & newLine
 +    End If
 +  End If
 + ' Let us display all the useful information now that we have the status.
 +        If Left(strLine, 5) = "Probe" Then
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strName = Mid(strLine, intStart, 250)
 +    strOutput = strOutput & vbtab & ": " & strName & " on Chassis Index " & strtempindex & vbcrlf
 +    End If
 +    If Left(strLine, 7) = "Reading" Then
 +        intStart = InStr(strLine, ":")
 +    intStart = intStart + 2
 +    strLayout = Mid(strLine, intStart, 250)
 +    strOutput = strOutput & vbtab & vbtab & "  : Temperature is " & strLayout & vbcrlf
 +    End If
 +      Wend
 + Wend
 +End Sub
 +</code>
 +</hidden>
 +\\ 
 +
 +Download source: {{:monitors:systemcheck.zip}}
 +
 +===== Screenshot =====
 +{{:monitors:syscheck.png?600}}
 +
 +===== Known  Bugs and Issues =====
 +  * None
 +
 +===== To Do =====
 +Please let me know of any issues with the script and I will attempt to resolve them.
 +
 +===== Credits =====
 +The script is in part based upon a batch script called openmanage.cmd written by Dave Sobel (dave@evolvetech.com)
 +
 +===== Changelog =====
 +
 +  * **2006-08-13**
 +    * 1.00 - Initial Development 
 +  * **2007-07-20**
 +    * 2.00 - Production Release
 +  * **2007-08-01**
 +    * 2.10 - Updated by Sigurður Guðbrandsson (sigurdur@raforninn.is) to report detailed information for Physical Disk, Memory, NIC and Temp
 +    * Now Requires OpenManage 5.2 to display the Physical disk information
 +  * **2007-08-03** 
 +    *2.20 - Resolved issue with a non green status changing all the following statuses to the non green status
 +  * **2007-08-07**
 +    * 2.30 - Added the ability to turn off individual status checks if not wanted.
 + 
  
  • monitors/dellsystemcheck.txt
  • Last modified: 2009/11/23 05:45
  • by 127.0.0.1